• TOO MUCH WALL, NOT ENOUGH WINDOW?...Proportion the window to rest of wall by the correct drapery planning.

• IF YOUR WINDOW IS TOO LONG AND THIN...Extend the rods at the sides to give a full and luxurious effect

• A SERIES OF WINDOWS?...Treat as a single window

• WINDOW TOO CLOSE TO CEILING ?  Raise rod to ceiling - extend rod at the sides.If desired, bring the draperies to the floor

Before you order remember:  When you put up drapery you usually install the rod at least 2-4 inches above the window and extended it 3-4 inches to each side of the widow frame. The reason for is is that  you want the draperies, when to hang outside the window  frame;  as opposed to inside the window, which would take away light and viewing space.  In addition the brackets that hold the rod have to be attached outside and above the window.  Therefore:  Measure the rod width and height  and allow an additional  10 to 12 inches for return and overlaps.

Measure with a steel tape measure as cloth tapes can stretch
Measure every window you intend to dress, even if some appear to be the same size
Avoid costly errors; write down all measurements as you take them.

Length: First choose your drapery rod and consider where you would position it.  Decorative rods have finials, so be sure you have enough wall space. For draperies that will be hung directly on the rod, measure from the top of the rod.  For draperies that will be hung from rings, measure from the bottom of the ring.  The hem should generally be 1" above the rug or floor.

Puddling: Exact length is less critical but you should add at least 12" to the above length if you like the relaxed puddled look.  This look is recommended for our softer jacquard fabrics.

Width:  when mounting your rod, be sure to consider the "stackback", the space on either side of the window needed to hold the width of gathered drape when  Set the drapery brackets from 6-12 inches on either side of the windowng.  If you don't intend to close your drapes, width is not critical.

Mr. Blooper said:
One way draw would be perfect for the 8 ft window, and also for the 12 ft window, each one meeting at the apex.

If you have problems with the supports,  the track can be attached to the ceiling.

Semi sheer drapes would be excellent as they cover a wide space with little weight problem.

Please send me a drawing and I will be able to help you more.

Mr. Blooper said:
At the present time, hopwever, we are unable to supply drapes at least 114" lomg.  However, we would be very happy to supply you with yardage which you could have made up into drapes locally.
 
 

Mr. Blooper said:
Thank you for your inquiry Christine. Your problem is relatively simple.

l).  Create an illusion of height.  Draperies should be ceiling to floor, no top treatments, which cut into height.

2).  Color should be natural, which gives you a feeling of space - dark colors engulf you.

3).    Mentally convert  your two windows into one.  You now have 62" plus frame x 84".

4).  Order l pr. 72 x 84 drapes  in your fabric of choice, color natural, off white or a similar light hue.

 Problem is - I don't have a clue as to what kind of window treatment to use for these windows.  We prefer to have privacy at night and don't like having just sheers ont he windows.  Do I use all the same material for all the windows?  Do I leave some of them uncovered?  My biggest problem is what to do with the bays.  I have not been able to find rods to fit inside these windows. The rod will have to go on the outside of the windows, these are Anderson windows and there really isn't an inside frame where you could hang rods.  We want the great room to be cozy and warm.  Probably more of a country look.  Can you help?  PLEASE?
Thank you.
 Debbie

Mr. Blooper said:
How can anybody refuse your plea.  However, a photo or polaroid would have been helpful..  The great room sounds exciting -lets begin with fabrics.  l). soft Ralph Lauren paisley @ 7.20 yd, 2). Jacobean style @ 7.20 yd.or 3).soft chenille tapestry @ 7.20 yd.

Style - your two 5' windows should be decorated as one with a cornice covering right across the two ( or, of course, a valance or swags and jabots).  The sliding glass door should have a one way draw to the wall.  The
adjoining 4 x 5 casement one pair drapes exactly the same length as the slider.  The two "crank" windows should have sheers with top treatments.

Bay windows are elegant - they just need thought.  Buy three wooden rods with rings.  Butt them together to the angle of your windows and use a plain matchingfabric ( to match other drapery) to create a soft relaxing country look.

Leave the skylights alone.

I hope this has been of some help.  Let me know.

Ms. Blooper says: Go to  any major building  supply store  and get butterfly mollies to use in the wall.  Theywhen you screw them in to the sheetrock..and look sort of like a butterfly doing a push-up on a mirror.   They  can sustain more weight than a single screw set into a plastic shield and should hold an average sized window drape and valance.

You don't mention the expanse of the window treatment (4 feet?  14 feet?) and that makes a huge difference in the weight.  For a triple treatment like you are using, you might need to use toggles from the ceiling to distribute  some of the heavy load (toggles are usually used to hang plants or lighting fixtures from a ceiling)

Do you carry Dunmore Fabrics, I am looking for a price on Evergreen#70,Hemlock#7029, and Juniper #70, could you please e-mail a  price per yard.

Mr. Blooper said:
Thank you for your inquiry.  We do not carry Dunmore Facrics.   It is very difficult to keep track of all the names different fabric houses give their selections.  Many houses order the same fabric from the fabric  mills and then give it their own name.  So giving us a  name is hard to track.   However, if you would send us a cutting, we would be happy to send you a sample of the the closest match we have available.

Mr. Blooper said:

You live in beautiful New England and own an 1879 victorian house, with elegant bay windows- Kris you have it made!! I envy you.

Now down to business.

1).  Purchase 3 wooden rods or plastic piping from Home Depot, Loews or similar, when butted together, you have the illusion of one rod.

2).  Make a rod pocket cover in the same fabric or contrast as the swags and cover the rod in the same, using triple the width of the rod.

3).  If you desire a scarf, you need 8 yds. of fabric to create the effect you are seeking.

                                              OR

Purchase wooden rods from Home Depot or similar.  Sponge paint, stain or crackle finish the rods - don't forget the end finials - then purchase 3 x 36" swags and l pr. jabot from us (We hope)

                                              OR

Ignore the bay window, make a straight line across it, order l set of swags to cover the width and l pr. of side drapes to frame the bay.

We could give you many more ideas if you supplied us with a photo of your problem window, also the coloring of your flooring, walls, furniture etc.